Other

Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit - 21T Front Drive Cog - 22T Rear Transfer Cog - 24T Axle Drive Cog - Cable stop required when installing on Sun Atlas Industrial Cargo Trike

Specialized Turbo Road Remote

A clean, effective look for mountain bikes with adjustable ride height seat posts. - Seat collar with integrated guide for the housing of adjustable ride height seat post. - Fits any frame with a seat tube OD of 34.9mm. - Weight: 24g

Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails. - 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design - New design clamp for better clamping and non-slipping of the saddle

The SRL lever gives riders with 1x drivetrains the option to control their Command Post with lever option that mounts beneath the bar in place of a front shifter. - Command Post lever for the modern 1x drivetrain systems. - Adjustable lever position allows for the perfect set up. - Sealed cartridge bearing pivot for smooth action. - Ideal pull ratio for easy lever activation. - Requires additional mounting hardware (SRAM MatchMaker or equivalent is recommended).

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Need a non-quick-release seatpost collar with some major bling? Then Salsa's Lip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

X01 Eagle Cable Anchor Kit

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

Trigger Clamp/Bolt Kit For X0 X9 X7

SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

- Includes: 2-16mm &2-14mm Aluminum Caliper pistons, Seals & O-rings—Guide Ultimate

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R

Replacement top caps and parts for RockShox forks.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Replacement lower hardware for Rockshox forks.

RockShox 30mm Seal Kit

RockShox 32mm Seal Kit

RockShox 30mm Seal Kit

RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.

RockShox 35mm Seal Kit

RockShox 32mm Seal Kit

RockShox 30mm Seal Kit

Replacement rebound knobs for RockShox forks.

RockShox 32mm Seal Kit

Replacement rebound knobs for RockShox forks.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

DebonAir air spring assembly to update Pike and Revelation forks.

RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!

The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm

Lyrik RC2 C1 200 Hour Service Kit

- Ergonomic 1x lever - Compatible with the Turbine and Aeffect Dropper Posts - Standard shifter cable and housing

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

The Problem Solvers Cantilever Stud Repair Kit is for repairing one stripped or damaged brake post on a frame.

The Problem Solvers Derailleur Hanger Plug is made of stainless steel and screws into the derailleur hanger on your frame to seal it and protect the threads from dirt and corrosion when you're turning a bicycle into a singlespeed, fixie or hub-gear bike. The plug is tightened from the inside so from the outside all you see is a nice custom finishing touch.

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

The Problem Solvers Self-Extracting Crank Bolts take the place of the existing bolts in Shimano/Octalink, Race Face ISIS, and M15-compatible cranksets to let you remove your crankarms with only an 8mm Allen wrench instead of special tools. A 10mm Allen wrench (sold separately) is used to install these fine aluminum self-extractors.

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

Problem Solvers Universal Derailleur Hangers The Universal Hanger replaces the drive-side nut on the quick-release skewer so you can get the majority of your gear range back. A vital tool to bring along when touring. - Emergency, on-the-trail derailleur hanger replacement - Enables you to keep riding and use the majority of your gear range - Compatible with most rear-facing-horizontal and vertical dropouts - Replaces the drive-side nut on 5mm quick-release skewers - Anti-rotation feature ensures the derailleur stays in place during use - CNC-machined AL-6061 with steel hardware

The Problem Solvers Center Lock Rotor Adapters are CNC-machined aluminum adapters that allow the use of 6-bolt rotors on Shimano's Center Lock hubs.

The Problem Solvers Travel Agent amplifies your braking power so that you can mix road, mountain and cyclocross brakes and brake levers. Instead of buying new levers or brakes, just install a Travel Agent and you're good to go. This trick gizmo is made of quality 6061 aluminum and is available with and without a built-in adjustment barrel. It works with cantilever brakes, road dropped handlebars, and Shimano STI and Campagnolo Ergopower levers.

• Allows the use of downtube shifters on bikes without downtube shifter braze-ons • Compatible with 9/10-speed Shimano shifters • 31.8mm clamp with shims for 28.6mm tubes • Shifters not included

The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.

The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.

The Problem Solvers BB30/Press-Fit 30 Adapter Kit consists of DuPont Delrin (a tough, light type of plastic) pieces that allow you to use your external bottom bracket-style crankarms (24mm spindles, such as a Shimano Hollowtech II crank) with newer BB30 and Press-Fit 30 bottom brackets. Please contact us if you have any questions about compatibility.

Our redesigned Puget 1x Lever, takes the place of our prior Puget 1x lever. With a weather-proof sealed cartridge bearing, enhanced ergonomics, and a textured paddle for enhanced grip, this budget-friendly lever looks and feels at home even on high-end builds. Designed to be used with bikes using a single front chainring, this is a "shifter style" lever. The lever comes with our standard 22.2mm clamp handlebar mount as well as two ports for adjustability.

Dropper post levers are something a lot of us overlook—we want our dropper to work but don't think about the button that makes the magic happen. After testing a bunch of levers, from the plastic ones to the ergonomically weird, even the best in class, we decided we could do better. So we made the Loam Lever. It's the most adjustable lever around, ensuring you can modify it to fit your exact ergonomic specifications. The lever's grippy, injection-molded pad has got your back in sloppy weather conditions. And, speaking of weather, we made sure the whole thing was as weatherproof as possible, meaning your lever won't squeak, bind up, or fail after being in the rain. The Loam Lever Has 5 Key Characteristics: 1. Adjustability - We believe precision matters, this lever provides two forms of adjustment so you can dial-in your perfect placement.  2. Weather Proof - Oversized high-quality sealed bearing paired with an additional seal and all stainless hardware for longevity and durability. 3. No-Slip Grip - Speaking of weather, the Loam Lever features a grippy, injection-molded thumb pad so you can drop or raise at the right time in even the sloppiest of conditions. 4. Techy AF - Custom CNC machining throughout the whole design of the Loam Lever for precision and weight reduction. 5. Direct Mount - Available in SRAM's MatchMaker X for Guide brakes and Shimano's I-Spec II for XTR M9000, XT M8000, SLX M7000, and DEORE M6046