Filter By:

  • Show More Brands
  • Show Fewer Brands

Seatposts

Strider Extra-Long Seatpost w/Saddle
$15.00
Is your little Strider rider getting taller? Strider's Extra-Long Seatpost w/Saddle extends your child's Strider Bike (sold separately) saddle height another three inches to a maximum of 19 inches off the ground. Recommended for children over four years old, it easily replaces the standard seatpost and saddle.
Cane Creek Thudbuster Seatpost
$206.49 - $230.33
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Crank Brothers Highline Dropper Seatpost
$350.00
Introducing the Highline: years of research, development, and rigorous testing has given rise to the world's finest dropper post and remote. Premium sealing, exclusive Igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge deliver industry leading quality and reliability. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specs: Setback: Zero Length: 345mm (100mm travel)/ 395mm (125mm travel)/ 465mm (160mm travel) Material: 7075-T6 aluminum Minimum Stack height: 47mm Weight: 525g (100mm travel)/ 560g (125mm travel)/ 610g (160mm travel) Warranty: 3 years
Ritchey Superlogic Carbon Seatpost
$287.38 - $373.98
Ritchey's one-bolt Superlogic Carbon is one of the lightest, toughest seatpost designs in the world. - Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment - Precision forged alloy clamp assembly for strength - Low-profile head for optimal saddle clearance and sleek lines - Wide saddle clamp reduces stress on lightweight saddle rails - Interchangeable clamps provide compatibiliy for all popular rail sizes - Carbon Monocoque Construction - Available in 27.2, 30.9 & 31.6mm diameters - Available in 350 & 400mm lengths - 25mm Offset - 7x7mm saddle rail clamp included - Saddle Clamp Torque Spec: 12Nm - 148g (27.2/300)
SDG Micro Alloy I-Beam Seatpost
$85.98
- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp) - I-Beam single rail clamp post specific to I-Beam saddles
Easton EA70 Zero-Offset Seatpost
$77.95 - $84.00
A sweet upgrade for your ride, Easton's EA70 seatpost is a proven staple of strength and reliability. It's built with Easton's TaperWall technology, which customizes the thickness of the aluminum walls to optimize strength without excess material. And, the integrated two-bolt clamp allows for precise, easy seat adjustments.
Race Face Next Seatpost
$131.98
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
Paul Component Engineering Tall And Handsome Seatpost
$186.00
- Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA
Ritchey Superlogic Carbon LINK Seatpost
$259.95
Ritchey's Superlogic Carbon LINK reinvents the two-bolt seatpost, making it lighter, more compliant, and more versatile than ever. - Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter - LINK Carbon Posts use FlexLogic carbon layup developed for ProTour team bikes from Stevens, Canyon and Scott – 15% more vertically compliant with no loss of lateral or torsional stiffness - 15mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment - Monocoque Carbon Construction - Diameters: 27.2, 30.9, 31.6mm - Offset: 15mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Lengths: 350, 400mm - Matte UD carbon finish - 145g (27.2x350)
Dimension Suspension Suspension Seatpost
$35.00
Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g
TruVativ Hussefelt Seatpost
$36.00 - $46.20
TruVativ's 6061-aluminum post lives up to the Hussefelt name, which promises performance, value and the ability to handle what the terrain dishes out. Specifically designed for the rigors of DH and freeride, it’s dependable, super-adjustable, and aggressively styled with bold graphics to match your ride.
Race Face Ride XC Seatpost
$40.32 - $41.38
- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g
Black Label Pivotal Seatpost
$5.99 $21.99 73% Savings
Black Label's Pivotal Seatpost keeps things light and simple. It's short, made of lightweight and tough nylon, and accepts pivotal seats (sold separately). - Weight: 95g
Profile Design Fast Forward Carbon Seatpost
$198.00
Profile's Fast Forward Carbon Seatpost effectively changes a 73-degree seat tube angle to 78 degrees and moves your saddle forward up to 38mm. Made with multi-layer, multi-directional carbon weave, the Fast Forward is super light, too. Plus, its double-bolt micro-adjustable clamp is easy to use and super secure.
Race Face Turbine Seat Post
$83.98
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
TruVativ Stylo T30 Seatpost
$65.75 - $81.21
TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.
Profile Design 1/TwentyFive Seatpost
$110.00
Profile Design's 1/TwentyFive seatpost is the choice when you need the most aggressive position possible. 25mm setback rails ensure that your fit is totally dialed before your next ride. The 2-bolt head enables micro-adjustments to your position and eases installation. The clamps evenly distribute pressure, reducing stress on carbon saddle rails.
KS LEV-Carbon Seatpost
$589.00
- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length
3T Stylus 0 LTD Seatpost
$360.00
Stylus is a fresh new take on the 2-bolt seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. Stylus–0 models place the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The top model Stylus–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - High-modulus carbon-fiber seatpost - Two-bolt parallel clamp - Weight: 195 grams
Dimension Standard Seatpost
$34.50
Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g
Odyssey Tripod Post
$38.85
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined
Specialized S-Works Carbon MTB Seatpost
$175.00
Take the sting out of rough trails with Specialized's S-Works Carbon MTB Seatpost. This super-light post fights bumps and vibration thanks to carbon's natural damping characteristics. And, you'll also love the micro-adjusting clamp that holds fast and makes seat adjustment super easy.
Ergon CF3 Pro Carbon Seatpost
In their pursuit of the ultimate road ride - and offering a nice upgrade for cyclocross and touring/gravel bikes, Ergon offers their ingenious CF3 Pro Carbon suspension seatpost. This radical design uses two independent carbon leaf springs that flex allowing the seat to move from 25 to 30mm to soak up road vibrations, while retaining optimum pedaling efficiency, too. The leaf springs are attached with a floating pivot head that keeps the seat parallel to the ground, even under larger impacts. And the head can be flipped around if you need more fore/aft saddle adjustment. On this brilliant seatpost you won't take a beating on rough surfaces and you'll pedal stronger, longer and finish your rides feeling fresher!
Thomson Elite Seatpost
Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Specialized S-Works SL Carbon 2-Bolt Seatpost
Light and stiff, Specialized's S-Works SL Carbon 2-Bolt Seatpost is the perfect complement to your thoroughbred racing steed. It's crafted from Specialized's FACT carbon for a premium blend of ultra lightness, outstanding power transfer and vibration damping. And, its 2-bolt clamp with carbon cradle holds fast and makes seat adjustments easy.
Specialized COBL GOBL-R Carbon Seatpost
Specialized's COBL GOBL-R Carbon Seatpost says “Smoother is Faster” with 18mm of vertical compliance, so potholes, expansion joints, and other road imperfections just melt away. Zertz vibration damping and FACT carbon construction take the sting out of the road so you can concentrate on putting down the power and enjoying the ride. Whether your ride takes you on pavement, gravel, or cobbled classics, the COBL GOBL-R makes it better.
Sunlite Alloy 350mm Seatpost
$19.99 - $23.99
• Forged aluminum • Integrated micro-adjust seat clamp
WeThePeople Socket Pivotal Post
$50.60 - $63.80
WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.
Profile Design 1/Zero Seatpost
$61.60
Profile Design's 1/Zero seatpost is the choice when you need the most aggressive position possible. Zero setback rails place you squarely above the bottom bracket for maximum power. The 2-bolt head enables micro-adjustments to your position and eases installation. The clamps evenly distribute pressure, reducing stress on carbon saddle rails.
Ritchey Superlogic Carbon Seatpost
$259.95
Ritchey's beautiful Superlogic Carbon Seatpost is made of high modulus monocoque carbon for ultra low weight and impressive vibration damping without sacrificing strength. Ritchey's single bolt clamp uses precision forged aluminum hardware, which cuts weight even further! And, the single bolt clamp makes installation and adjustment a breeze, too.
Page 1 of 4 Next page