Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
• Replacement ratchet set for Louis Garneau's Monte shoes (sold separately) • 2 pieces
Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: Red is low; Yellow is mid; Blue is High. - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance
Key features: - Compatible with all BOA equipped Bontrager shoes except Circuit and Sonic - Mix-and-match buckle and shoe colors to get a unique and customized look - Left/right specific design - BOA IP1 dial kits include dial, 1m of lace, T6 tool, and instructions - Red dials only include the dial - no lace - For additional service/warranty information visit: www.boatechnology.com
Beautiful biomotion The Halo S1 Softshell Shoe Cover is your answer for day and night detectability at temps at or above 30-degree F/-1-degree C. With both high-viz color and reflective material in a single garment, Halo provides ultimate visibility, day or night. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Provides biomotion visibility to ensure you're seen by motorists day or night - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance bio-motion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures
Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding
Key features: - Genuine replacement heel studs for your Bontrager road shoes - Maintains traction when walking off-the-bike - Includes mounting screws
Allows simple, removable, in-shoe adjustment to the forefoot varus and valgus angles for optimum foot, knee and hip alignment. - Reversible shims now work for right or left application - Vented for comfort - Package includes 2 pair varus shims (orange) and 1 pair valgus shims (yellow)
$30.00 - $44.99
Specialized's High Performance Footbeds were developed by biomechanical expert, Dr. Andy Pruitt of the Boulder Center For Sports Medicine. Their amazing, ergonomic shape increases comfort and efficiency while reducing the potential for injury, too. They provide arch support with additional longitudinal arches and metatarsal button support at different levels allowing every rider to achieve a semi-custom fit. You'll be amazed how much nicer your shoes fit and feel!
$29.99 - $30.00
These 3mm stackers can easily correct the common issue of leg length inequality. - External cleat lift for addressing leg length inequality - Shaped to fit SPD SL, Look KEO and Speedplay - Includes longer screws - Package includes 4 cleat stackers
Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
Your S-Works MTB shoes thanklessly accompany you through nature's muddiest, toughest conditions, so thank them and keep them ticking with Specialized's Replacement S-Works Mountain Shoe Lug Kit. These lugs replace the worn-out tread on your S-Works Mountain shoes. •Includes heel, ball, and toe pieces •Includes toe spikes •Sold in pairs; includes screws
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low profile - Replaces without tools
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
• Replacement ratchet set for selected styles of Garneau's shoes • 2 pieces
Protect your feet from the elements with the Thermax II. This shoe cover provides high insulation from the cold and is very water resistant. The Thermax II offers maximum visibility thanks to reflective accents located at the front, rear and side. DETAILS: - Fabric: All seam-sealed 3 mm super stretch neoprene laminated with fleece - Under sole: Under opening with Velcro for easy adjustment and reinforced rubber for durability - Side opening: Side Velcro with safety puller for easy slip-on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
$24.95 - $28.70
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Specialized's BG Footbeds were developed by biomechanical expert, Dr. Andy Pruitt of the Boulder Center For Sports Medicine. Their amazing, ergonomic shape increases power, endurance, and comfort, while optimizing hip, knee, and foot alignment. You'll be amazed how much nicer your shoes fit and feel! - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
$49.99 - $50.00
Endura's Road II Overshoes are an essential accessory for when the weather calls for rain, wind, and cold. Crafted from smooth neoprene, these water-resistant covers feature rugged Kevlar soles with cleat cutouts. They also have rear zips for a snug fit, durable stitching, reflective accents, and a crank rub protection print.
$24.99 - $25.00
Add that bit of extra warmth to prevent chilly toes with Endura's FS260-Pro Slick Toe Covers. Your toes will thank you because these sleek, waterproof covers slip right on your shoes to block the wind, rain, chilly breezes and cool temperatures.
Key features: - Low-profile, micro-release ratchet buckle - Compatible with 2014-Current shoes - Left/right-specific design - Sold in pairs - For optimal hold, it's highly recommended to also replace the ratcheting straps
Cold feet and soggy socks are things of the past with Bellwether's Aqua-No Booties. Their Aqua-No fabric and seam-sealed construction shuts out precipitation while letting air flow freely. They feature zip closures for easy on and off as well as reflective trim for enhanced visibility. Plus, cleat cutouts and reinforced heels and toes provide durability. Features: - Waterproof and breathable - Seam-sealed construction - Reinforced heel and toe - Fits any cleats - Reflective accents and logos - Zippered closure
These 3mm stackers can easily correct the common issue of leg length inequality. - External cleat lift for addressing leg length inequality. - Shaped to fit SPD SL, Look KEO, and Speedplay pedals. - Includes longer screws. - Package includes two cleat stackers.
• Replacement ratchet tongue for selected styles of shoes • 2 pieces • 93mm
The in-between solution to protect your feet on those chilly days. FABRICS: -ISO LITE: Provides warmth in cool weather -ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: -Cleat opening under sole -Flatlock seams: Enhanced comfort -Reflective puller
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
If the sun is shining, why not go for a ride despite the cold? The Wind Dry 2 is an excellent wind-breaker that will protect your feet from the cold so you can extend your riding season safely thanks to reflective accents on all sides. DETAILS: - Fabric: WIND DRY fabric blocks cold while providing breathability - Neoprene cuff: Better fit and prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - HiViz360: Reflectors at rear, front, and sides for optimum visibility
Page 1 of 2 Next page